Groom with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Groom” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.8 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 7: 2 outer edges and 5 cut-outs |
| Cut length | 972 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 262 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 954 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | Over 1.5 mm | 247 mm | 180 | Vinyl, card and thin sheet |
| 2 × 0.91 in (51 × 23 mm) | Over 3 mm | 494 mm | 50 | Any material, including 3 mm wood and acrylic |
| 3 × 1.37 in (76 × 35 mm) | Over 4.6 mm | 741 mm | 21 | Any material, including 3 mm wood and acrylic |
| 4 × 1.82 in (102 × 46 mm) | Over 6.1 mm | 988 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.74 in (152 × 69 mm) | Over 9.1 mm | 1,481 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.65 in (203 × 93 mm) | Over 12 mm | 1,975 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.47 in (305 × 139 mm) | Over 18 mm | 2,963 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Groom SVG files
-
Groom with a diamond ring Solid · 4 pieces
-
Groom in Pacifico Solid · one piece
-
Groom in Lobster Solid · 3 pieces
-
Groom in Kaushan Script Solid · 5 pieces
-
Groom in Lilita One Solid · 5 pieces
-
Groom in Alfa Slab One Solid · 5 pieces
-
Groom in Amatic SC Solid · 5 pieces
-
Groom in block capitals Solid · 5 pieces
← Groom stencil plate All 13 Groom designs Groom with a diamond ring →