Free grass SVG

Layered grass in three greens SVG

Layered grass in three greens, in layered colours — Layered grass in three greens. The preview is the SVG file itself.

Three layers to stack: a tall dark rank at the back, a middle rank and a short pale one in front, all on the same base. Raise each on foam pads for a border with depth.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 48 mm (3.94 × 1.91 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	10: 3 outer edges and 7 cut-outs
Cut length	2,770 mm at this size
Narrowest part	3.3 mm at this size
Nodes	617 curve and line segments
Layers	3: back, middle and front

Measured from the file. PNG: 2,000 × 1,008 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.48 in (25 × 12 mm)	0.84 mm	704 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 0.97 in (51 × 25 mm)	1.7 mm	1,407 mm	50	Vinyl, card and thin sheet
3 × 1.45 in (76 × 37 mm)	2.5 mm	2,111 mm	21	Vinyl, card and thin sheet
4 × 1.94 in (102 × 49 mm)	3.4 mm	2,814 mm	10	Any material, including 3 mm wood and acrylic
6 × 2.9 in (152 × 74 mm)	5 mm	4,221 mm	3	Any material, including 3 mm wood and acrylic
8 × 3.87 in (203 × 98 mm)	6.7 mm	5,629 mm	2	Any material, including 3 mm wood and acrylic
12 × 5.81 in (305 × 148 mm)	10 mm	8,443 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More grass SVG files

← Grass outline All 14 grass designs Grass border →