Free graph paper SVG

Log-log graph paper with two cycles SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Log-log graph paper with two cycles, drawn as a line
Log-log graph paper with two cycles. The preview is the SVG file itself.

Two cycles of a logarithmic scale each way, 45 mm to the cycle, with a heavy line where each cycle starts. Within a cycle the lines stand at the logarithms of 2 to 9, so they crowd towards its far end.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut327: 2 outer edges and 325 cut-outs
Cut length6,804 mm at this size
Thinnest line or dot0.6 mm at this size
Nodes1,316 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightThinnest line or dotCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.15 mm1,728 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.3 mm3,456 mm25Too fine for most machines
3 × 3 in (76 × 76 mm)0.46 mm5,185 mm9Too fine for most machines
4 × 4 in (102 × 102 mm)0.61 mm6,913 mm4Fine detail: vinyl and paper only, weed with care
6 × 6 in (152 × 152 mm)0.91 mm10,369 mm1Fine detail: vinyl and paper only, weed with care
8 × 8 in (203 × 203 mm)1.2 mm13,826 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)1.8 mm20,739 mm1Vinyl, card and thin sheet

The thinnest line or dot is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More graph paper SVG files

← Polar graph paper with 5 mm circles All 15 sheets of graph paper Semi-log graph paper, two cycles by 5 mm →