Goose with three goslings SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A goose leading three goslings along a strip of ground with tufts of grass, each gosling a ball of fluff on big feet. The ground joins all four, so the family cuts as one piece.
What is in the file
| Size | 100 × 54 mm (3.94 × 2.13 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 703 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 373 curve and line segments |
Measured from the file. PNG: 2,000 × 1,117 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.54 in (25 × 14 mm) | 0.25 mm | 179 mm | 160 | Too fine for most machines |
| 2 × 1.08 in (51 × 27 mm) | 0.51 mm | 357 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.62 in (76 × 41 mm) | 0.76 mm | 536 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.16 in (102 × 55 mm) | 1 mm | 714 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.25 in (152 × 82 mm) | 1.5 mm | 1,071 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.33 in (203 × 110 mm) | 2 mm | 1,428 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.49 in (305 × 165 mm) | 3 mm | 2,143 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.