Free Gone Fishing SVG

Gone Fishing in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gone Fishing in Amatic SC, as a solid black shape
Gone Fishing in Amatic SC. The preview is the SVG file itself.

“Gone Fishing” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 93 mm (3.94 × 3.67 in), scales to any size
Pieces11 separate pieces
Outlines to cut12: 11 outer edges and 1 cut-out
Cut length1,427 mm at this size
Narrowest part1.4 mm at this size
Nodes403 curve and line segments

Measured from the file. PNG: 2,000 × 1,867 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.36 mm362 mm100Too fine for most machines
2 × 1.86 in (51 × 47 mm)0.71 mm725 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.79 in (76 × 71 mm)1.1 mm1,087 mm12Vinyl, card and thin sheet
4 × 3.72 in (102 × 95 mm)1.4 mm1,450 mm6Vinyl, card and thin sheet
6 × 5.59 in (152 × 142 mm)2.1 mm2,175 mm2Vinyl, card and thin sheet
8 × 7.45 in (203 × 189 mm)2.8 mm2,900 mm1Vinyl, card and thin sheet
12 × 11.17 in (305 × 284 mm)4.3 mm4,349 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Gone Fishing SVG files

← Gone Fishing in Alfa Slab One All 13 Gone Fishing designs Gone Fishing in block capitals →