Free Gone Fishing SVG

Gone Fishing outline lettering SVG

Gone Fishing outline lettering, drawn as a line — Gone Fishing outline lettering. The preview is the SVG file itself.

“Gone Fishing” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 64 mm (3.94 × 2.5 in), scales to any size
Pieces	16 separate pieces
Outlines to cut	32: 16 outer edges and 16 cut-outs
Cut length	1,550 mm at this size
Narrowest part	1.4 mm at this size
Nodes	390 curve and line segments

Measured from the file. PNG: 2,000 × 1,298 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.64 in (25 × 16 mm)	0.36 mm	394 mm	140	Too fine for most machines
2 × 1.27 in (51 × 32 mm)	0.71 mm	787 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.9 in (76 × 48 mm)	1.1 mm	1,181 mm	15	Vinyl, card and thin sheet
4 × 2.54 in (102 × 65 mm)	1.4 mm	1,575 mm	8	Vinyl, card and thin sheet
6 × 3.81 in (152 × 97 mm)	2.1 mm	2,362 mm	3	Vinyl, card and thin sheet
8 × 5.08 in (203 × 129 mm)	2.8 mm	3,150 mm	2	Vinyl, card and thin sheet
12 × 7.62 in (305 × 194 mm)	4.3 mm	4,724 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Gone Fishing SVG files

← Gone Fishing with stars All 12 Gone Fishing designs Gone Fishing stencil plate →