Free Go Fight Win SVG

Go Fight Win with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Go Fight Win with stars, as a solid black shape — Go Fight Win with stars. The preview is the SVG file itself.

“Go Fight Win” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size	43 × 100 mm (1.68 × 3.94 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	16: 13 outer edges and 3 cut-outs
Cut length	861 mm at this size
Narrowest part	0.8 mm at this size
Nodes	366 curve and line segments

Measured from the file. PNG: 898 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.43 × 1 in (11 × 25 mm)	0.2 mm	219 mm	190	Too fine for most machines
0.85 × 2 in (22 × 51 mm)	0.41 mm	437 mm	55	Too fine for most machines
1.28 × 3 in (33 × 76 mm)	0.61 mm	656 mm	24	Fine detail: vinyl and paper only, weed with care
1.71 × 4 in (43 × 102 mm)	0.81 mm	875 mm	12	Fine detail: vinyl and paper only, weed with care
2.56 × 6 in (65 × 152 mm)	1.2 mm	1,312 mm	4	Vinyl, card and thin sheet
3.42 × 8 in (87 × 203 mm)	1.6 mm	1,750 mm	3	Vinyl, card and thin sheet
5.12 × 12 in (130 × 305 mm)	2.4 mm	2,624 mm	2	Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Go Fight Win SVG files

← Go Fight Win in script and capitals All 12 Go Fight Win designs Go Fight Win outline lettering →