Go Fight Win in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Go Fight Win” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 72 × 100 mm (2.84 × 3.94 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 14: 12 outer edges and 2 cut-outs |
| Cut length | 912 mm at this size |
| Narrowest part | 4.9 mm at this size |
| Nodes | 218 curve and line segments |
Measured from the file. PNG: 1,463 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.72 × 1 in (18 × 25 mm) | 1.2 mm | 232 mm | 130 | Vinyl, card and thin sheet |
| 1.44 × 2 in (37 × 51 mm) | 2.5 mm | 463 mm | 35 | Vinyl, card and thin sheet |
| 2.16 × 3 in (55 × 76 mm) | 3.7 mm | 695 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.88 × 4 in (73 × 102 mm) | 5 mm | 927 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.33 × 6 in (110 × 152 mm) | 7.5 mm | 1,390 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.77 × 8 in (147 × 203 mm) | 10 mm | 1,853 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.65 × 12 in (220 × 305 mm) | 15 mm | 2,780 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Go Fight Win SVG files
-
Go Fight Win in Alfa Slab One Solid · 12 pieces -
Go Fight Win in Amatic SC Solid · 10 pieces -
Go Fight Win in block capitals Solid · 10 pieces -
Go Fight Win in script and capitals Solid · 9 pieces -
Go Fight Win with stars Solid · 13 pieces -
Go Fight Win outline lettering Outline · 14 pieces -
Go Fight Win stencil plate Solid · one piece -
Go Fight Win with a drop shadow Layered · 9 pieces
← Go Fight Win in Kaushan Script All 12 Go Fight Win designs Go Fight Win in Alfa Slab One →