Free gingerbread man SVG

Two gingerbread men holding hands SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two gingerbread men holding hands, as a solid black shape
Two gingerbread men holding hands. The preview is the SVG file itself.

A gingerbread man and a gingerbread girl side by side, joined at the hand: a couple for a card, a mug or a pair of matching shirts.

What is in the file

Size100 × 71 mm (3.94 × 2.78 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut27: 1 outer edge and 26 cut-outs
Cut length983 mm at this size
Narrowest part1 mm at this size
Nodes404 curve and line segments

Measured from the file. PNG: 2,000 × 1,437 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.25 mm250 mm130Too fine for most machines
2 × 1.41 in (51 × 36 mm)0.51 mm499 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.12 in (76 × 54 mm)0.76 mm749 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.83 in (102 × 72 mm)1 mm999 mm8Vinyl, card and thin sheet
6 × 4.24 in (152 × 108 mm)1.5 mm1,498 mm2Vinyl, card and thin sheet
8 × 5.66 in (203 × 144 mm)2 mm1,997 mm2Vinyl, card and thin sheet
12 × 8.48 in (305 × 215 mm)3 mm2,996 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gingerbread man SVG files

← Gingerbread man border All 19 gingerbread men Gingerbread man ornament in a ring →