Free gift box SVG

Gift box with a lid and bow SVG

Gift box with a lid and bow, as a solid black shape
Gift box with a lid and bow. The preview is the SVG file itself.

A wrapped gift box seen from the front: a lid that overhangs the box, a ribbon running up the middle and a bow of two open loops and two tails on top. Cut lines mark the ribbon and the lid, and it is all one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size96 × 100 mm (3.78 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length884 mm at this size
Narrowest part4.3 mm at this size
Nodes76 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,921 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)1.1 mm225 mm100Vinyl, card and thin sheet
1.92 × 2 in (49 × 51 mm)2.2 mm449 mm25Vinyl, card and thin sheet
2.88 × 3 in (73 × 76 mm)3.3 mm674 mm9Any material, including 3 mm wood and acrylic
3.84 × 4 in (97 × 102 mm)4.4 mm898 mm6Any material, including 3 mm wood and acrylic
5.75 × 6 in (146 × 152 mm)6.6 mm1,347 mm2Any material, including 3 mm wood and acrylic
7.67 × 8 in (195 × 203 mm)8.7 mm1,796 mm1Any material, including 3 mm wood and acrylic
11.51 × 12 in (292 × 305 mm)13 mm2,694 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gift box SVG files

← Gift box with a lid template All 13 gift boxes Square present tied with ribbon →