Free giant flower SVG

Giant flower petal to print and cut by hand SVG

Giant flower petal to print and cut by hand, drawn as a line
Giant flower petal to print and cut by hand. The preview is the SVG file itself.

The two larger rose petals as a line drawing, with the slit marked as a line up from the foot. Print each at full size on its own sheet, cut it out with scissors and use it as the pattern for the rest. Printed 370 mm wide, the petals are 250 and 199 mm tall.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 68 mm (3.94 × 2.66 in), scales to any size
Pieces2 separate pieces
Outlines to cut4: 2 outer edges and 2 cut-outs
Cut length775 mm at this size
Narrowest part1.6 mm at this size
Nodes83 curve and line segments

Measured from the file. PNG: 2,000 × 1,375 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.68 in (25 × 17 mm)0.41 mm197 mm130Too fine for most machines
2 × 1.35 in (51 × 34 mm)0.81 mm394 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.03 in (76 × 51 mm)1.2 mm591 mm15Vinyl, card and thin sheet
4 × 2.7 in (102 × 69 mm)1.6 mm787 mm8Vinyl, card and thin sheet
6 × 4.05 in (152 × 103 mm)2.4 mm1,181 mm2Vinyl, card and thin sheet
8 × 5.4 in (203 × 137 mm)3.3 mm1,575 mm2Any material, including 3 mm wood and acrylic
12 × 8.1 in (305 × 206 mm)4.9 mm2,362 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More giant flower SVG files

← Giant flower leaves in two sizes All 10 giant flowers Giant flower rose seen from above →