Free Future Mrs SVG

Future Mrs in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Future Mrs in Amatic SC, as a solid black shape
Future Mrs in Amatic SC. The preview is the SVG file itself.

“Future Mrs” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size92 × 100 mm (3.61 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut11: 9 outer edges and 2 cut-outs
Cut length1,275 mm at this size
Narrowest part2.1 mm at this size
Nodes358 curve and line segments

Measured from the file. PNG: 1,842 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.53 mm324 mm100Fine detail: vinyl and paper only, weed with care
1.84 × 2 in (47 × 51 mm)1.1 mm648 mm25Vinyl, card and thin sheet
2.75 × 3 in (70 × 76 mm)1.6 mm972 mm12Vinyl, card and thin sheet
3.67 × 4 in (93 × 102 mm)2.1 mm1,295 mm6Vinyl, card and thin sheet
5.51 × 6 in (140 × 152 mm)3.2 mm1,943 mm2Any material, including 3 mm wood and acrylic
7.34 × 8 in (187 × 203 mm)4.3 mm2,591 mm1Any material, including 3 mm wood and acrylic
11.02 × 12 in (280 × 305 mm)6.4 mm3,886 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Future Mrs SVG files

← Future Mrs in Alfa Slab One All 13 Future Mrs designs Future Mrs in block capitals →