Free forest SVG

Forest silhouette on a hill SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Forest silhouette on a hill, as a solid black shape
Forest silhouette on a hill. The preview is the SVG file itself.

Ten trees along the brow of a low hill: pines, saw-edged spruces, round oaks and one poplar, with the tallest pine near the middle. The hill welds them into one solid shape for a sign, a card front or a wall decal.

What is in the file

Size100 × 57 mm (3.94 × 2.26 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length667 mm at this size
Narrowest part1.7 mm at this size
Nodes134 curve and line segments

Measured from the file. PNG: 2,000 × 1,181 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 15 mm)0.43 mm169 mm150Too fine for most machines
2 × 1.15 in (51 × 29 mm)0.86 mm339 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.72 in (76 × 44 mm)1.3 mm508 mm18Vinyl, card and thin sheet
4 × 2.3 in (102 × 58 mm)1.7 mm678 mm8Vinyl, card and thin sheet
6 × 3.44 in (152 × 87 mm)2.6 mm1,017 mm3Vinyl, card and thin sheet
8 × 4.59 in (203 × 117 mm)3.5 mm1,355 mm2Any material, including 3 mm wood and acrylic
12 × 6.89 in (305 × 175 mm)5.2 mm2,033 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More forest SVG files

← Layered forest in three greens All 14 forests Forest treeline border →