Free For This Child We Have Prayed SVG

For This Child in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

For This Child in Lilita One, as a solid black shape
For This Child in Lilita One. The preview is the SVG file itself.

“For This Child We Have Prayed” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 28 mm (3.94 × 1.11 in), scales to any size
Pieces26 separate pieces
Outlines to cut35: 26 outer edges and 9 cut-outs
Cut length833 mm at this size
Narrowest part1.8 mm at this size
Nodes419 curve and line segments

Measured from the file. PNG: 2,000 × 621 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.28 in (25 × 7 mm)0.46 mm212 mm250Too fine for most machines
2 × 0.57 in (51 × 14 mm)0.91 mm423 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.85 in (76 × 22 mm)1.4 mm635 mm33Vinyl, card and thin sheet
4 × 1.13 in (102 × 29 mm)1.8 mm846 mm18Vinyl, card and thin sheet
6 × 1.7 in (152 × 43 mm)2.7 mm1,269 mm6Vinyl, card and thin sheet
8 × 2.26 in (203 × 58 mm)3.7 mm1,693 mm4Any material, including 3 mm wood and acrylic
12 × 3.4 in (305 × 86 mm)5.5 mm2,539 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More For This Child We Have Prayed SVG files

← For This Child in Lobster All 10 For This Child We Have Prayed designs For This Child in Amatic SC →