Free fishing pole SVG

Fishing boat with an angler SVG

Fishing boat with an angler, as a solid black shape
Fishing boat with an angler. The preview is the SVG file itself.

A small boat with an outboard motor and one angler in a hat, sitting with a pole out over the bow. The line runs down to a float on the water, which joins everything into one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 58 mm (3.94 × 2.29 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length858 mm at this size
Narrowest part2.5 mm at this size
Nodes170 curve and line segments

Measured from the file. PNG: 2,000 × 1,194 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.58 in (25 × 15 mm)0.64 mm218 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.16 in (51 × 30 mm)1.3 mm436 mm40Vinyl, card and thin sheet
3 × 1.74 in (76 × 44 mm)1.9 mm654 mm18Vinyl, card and thin sheet
4 × 2.32 in (102 × 59 mm)2.5 mm872 mm8Vinyl, card and thin sheet
6 × 3.49 in (152 × 89 mm)3.8 mm1,308 mm3Any material, including 3 mm wood and acrylic
8 × 4.65 in (203 × 118 mm)5.1 mm1,743 mm2Any material, including 3 mm wood and acrylic
12 × 6.97 in (305 × 177 mm)7.6 mm2,615 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fishing pole SVG files

← Fishing net All 16 fishing poles Layered fishing pole in five colours →