Free fence SVG

Barbed wire fence on wooden posts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Barbed wire fence on wooden posts, as a solid black shape
Barbed wire fence on wooden posts. The preview is the SVG file itself.

Three rough leaning posts strung with three strands of barbed wire that sag a little between them, each barb a small cross on the strand. Grass grows at the foot of the posts.

What is in the file

Size100 × 77 mm (3.94 × 3.02 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length1,280 mm at this size
Narrowest part1.1 mm at this size
Nodes703 curve and line segments

Measured from the file. PNG: 2,000 × 1,552 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 19 mm)0.28 mm325 mm120Too fine for most machines
2 × 1.53 in (51 × 39 mm)0.56 mm650 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.3 in (76 × 58 mm)0.84 mm975 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.07 in (102 × 78 mm)1.1 mm1,300 mm6Vinyl, card and thin sheet
6 × 4.6 in (152 × 117 mm)1.7 mm1,951 mm2Vinyl, card and thin sheet
8 × 6.14 in (203 × 156 mm)2.2 mm2,601 mm1Vinyl, card and thin sheet
12 × 9.2 in (305 × 234 mm)3.4 mm3,901 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More fence SVG files

← Iron fence gates with spear tops All 16 fences Spooky iron fence with a crow →