Free Faith Hope Love SVG

Faith Hope Love stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Faith Hope Love stencil plate, as a solid black shape
Faith Hope Love stencil plate. The preview is the SVG file itself.

A rounded plate with “FAITH HOPE LOVE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size77 × 100 mm (3.04 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,585 mm at this size
Narrowest part1.4 mm at this size
Nodes265 curve and line segments

Measured from the file. PNG: 1,560 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.36 mm403 mm120Too fine for most machines
1.54 × 2 in (39 × 51 mm)0.71 mm805 mm35Fine detail: vinyl and paper only, weed with care
2.31 × 3 in (59 × 76 mm)1.1 mm1,208 mm12Vinyl, card and thin sheet
3.08 × 4 in (78 × 102 mm)1.4 mm1,610 mm6Vinyl, card and thin sheet
4.63 × 6 in (118 × 152 mm)2.1 mm2,416 mm2Vinyl, card and thin sheet
6.17 × 8 in (157 × 203 mm)2.8 mm3,221 mm1Vinyl, card and thin sheet
9.25 × 12 in (235 × 305 mm)4.3 mm4,831 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith Hope Love SVG files

← Faith Hope Love outline lettering All 13 Faith Hope Love designs Faith Hope Love with a drop shadow →