Free Faith Hope Love SVG

Faith Hope Love in Alfa Slab One SVG

Faith Hope Love in Alfa Slab One, as a solid black shape
Faith Hope Love in Alfa Slab One. The preview is the SVG file itself.

“Faith Hope Love” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size84 × 100 mm (3.31 × 3.94 in), scales to any size
Pieces14 separate pieces
Outlines to cut20: 14 outer edges and 6 cut-outs
Cut length1,280 mm at this size
Narrowest part3.1 mm at this size
Nodes469 curve and line segments

Measured from the file. PNG: 1,692 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.79 mm325 mm110Fine detail: vinyl and paper only, weed with care
1.68 × 2 in (43 × 51 mm)1.6 mm650 mm30Vinyl, card and thin sheet
2.52 × 3 in (64 × 76 mm)2.4 mm975 mm12Vinyl, card and thin sheet
3.36 × 4 in (85 × 102 mm)3.1 mm1,300 mm6Any material, including 3 mm wood and acrylic
5.04 × 6 in (128 × 152 mm)4.7 mm1,951 mm2Any material, including 3 mm wood and acrylic
6.72 × 8 in (171 × 203 mm)6.3 mm2,601 mm1Any material, including 3 mm wood and acrylic
10.08 × 12 in (256 × 305 mm)9.4 mm3,901 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Faith Hope Love SVG files

← Faith Hope Love in Lilita One All 12 Faith Hope Love designs Faith Hope Love in Amatic SC →