Free Fa La La La Llama SVG

Fa La La La Llama in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fa La La La Llama in Pacifico, as a solid black shape
Fa La La La Llama in Pacifico. The preview is the SVG file itself.

“Fa La La La Llama” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 58 mm (3.94 × 2.27 in), scales to any size
Pieces7 separate pieces
Outlines to cut14: 7 outer edges and 7 cut-outs
Cut length994 mm at this size
Narrowest part1.4 mm at this size
Nodes330 curve and line segments

Measured from the file. PNG: 2,000 × 1,185 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.58 in (25 × 15 mm)0.36 mm252 mm150Too fine for most machines
2 × 1.15 in (51 × 29 mm)0.71 mm505 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.73 in (76 × 44 mm)1.1 mm757 mm18Vinyl, card and thin sheet
4 × 2.3 in (102 × 59 mm)1.4 mm1,010 mm8Vinyl, card and thin sheet
6 × 3.46 in (152 × 88 mm)2.1 mm1,515 mm3Vinyl, card and thin sheet
8 × 4.61 in (203 × 117 mm)2.8 mm2,020 mm2Vinyl, card and thin sheet
12 × 6.91 in (305 × 176 mm)4.3 mm3,030 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fa La La La Llama SVG files

← Fa La La La Llama with a llama’s face All 13 Fa La La La Llama designs Fa La La La Llama in Lobster →