Free Fa La La La Llama SVG

Fa La La La Llama in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fa La La La Llama in Lilita One, as a solid black shape
Fa La La La Llama in Lilita One. The preview is the SVG file itself.

“Fa La La La Llama” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 50 mm (3.94 × 1.96 in), scales to any size
Pieces13 separate pieces
Outlines to cut19: 13 outer edges and 6 cut-outs
Cut length847 mm at this size
Narrowest part2.9 mm at this size
Nodes216 curve and line segments

Measured from the file. PNG: 2,000 × 1,033 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.74 mm215 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.99 in (51 × 25 mm)1.5 mm430 mm50Vinyl, card and thin sheet
3 × 1.49 in (76 × 38 mm)2.2 mm645 mm21Vinyl, card and thin sheet
4 × 1.99 in (102 × 50 mm)2.9 mm861 mm10Vinyl, card and thin sheet
6 × 2.98 in (152 × 76 mm)4.4 mm1,291 mm3Any material, including 3 mm wood and acrylic
8 × 3.98 in (203 × 101 mm)5.9 mm1,721 mm2Any material, including 3 mm wood and acrylic
12 × 5.96 in (305 × 151 mm)8.8 mm2,582 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Fa La La La Llama SVG files

← Fa La La La Llama in Kaushan Script All 13 Fa La La La Llama designs Fa La La La Llama in Alfa Slab One →