Expecting a Little Firecracker with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Expecting a Little Firecracker” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 85 mm (3.94 × 3.35 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 41: 12 outer edges and 29 cut-outs |
| Cut length | 2,308 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 847 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,712 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.85 in (25 × 22 mm) | 0.53 mm | 586 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.7 in (51 × 43 mm) | 1.1 mm | 1,172 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.55 in (76 × 65 mm) | 1.6 mm | 1,759 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.4 in (102 × 86 mm) | 2.1 mm | 2,345 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.1 in (152 × 130 mm) | 3.2 mm | 3,517 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.8 in (203 × 173 mm) | 4.3 mm | 4,690 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.2 in (305 × 259 mm) | 6.4 mm | 7,035 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Expecting a Little Firecracker SVG files
-
Expecting a Little Firecracker with a firework Solid · 21 pieces
-
Expecting a Little Firecracker in Pacifico Solid · 8 pieces
-
Expecting a Little Firecracker in Lobster Solid · 4 pieces
-
Expecting a Little Firecracker in Kaushan Script Solid · 30 pieces
-
Expecting a Little Firecracker in Lilita One Solid · 30 pieces
-
Expecting a Little Firecracker in Alfa Slab One Solid · 29 pieces
-
Expecting a Little Firecracker in Amatic SC Solid · 27 pieces
-
Expecting a Little Firecracker in block capitals Solid · 27 pieces
← Expecting a Little Firecracker stencil plate All 13 Expecting a Little Firecracker designs Expecting a Little Firecracker with a firework →