Expecting a Little Firecracker in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Expecting a Little Firecracker” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 59 mm (3.94 × 2.34 in), scales to any size |
|---|---|
| Pieces | 30 separate pieces |
| Outlines to cut | 38: 30 outer edges and 8 cut-outs |
| Cut length | 1,210 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 496 curve and line segments |
Measured from the file. PNG: 2,000 × 1,219 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.59 in (25 × 15 mm) | 0.53 mm | 307 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.19 in (51 × 30 mm) | 1.1 mm | 615 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.78 in (76 × 45 mm) | 1.6 mm | 922 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.38 in (102 × 60 mm) | 2.1 mm | 1,229 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.56 in (152 × 91 mm) | 3.2 mm | 1,844 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.75 in (203 × 121 mm) | 4.3 mm | 2,459 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.13 in (305 × 181 mm) | 6.4 mm | 3,688 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Expecting a Little Firecracker SVG files
-
Expecting a Little Firecracker in Alfa Slab One Solid · 29 pieces
-
Expecting a Little Firecracker in Amatic SC Solid · 27 pieces
-
Expecting a Little Firecracker in block capitals Solid · 27 pieces
-
Expecting a Little Firecracker in script and capitals Solid · 20 pieces
-
Expecting a Little Firecracker with hearts Solid · 10 pieces
-
Expecting a Little Firecracker outline lettering Outline · 30 pieces
-
Expecting a Little Firecracker stencil plate Solid · one piece
-
Expecting a Little Firecracker with a drop shadow Layered · 12 pieces
← Expecting a Little Firecracker in Kaushan Script All 13 Expecting a Little Firecracker designs Expecting a Little Firecracker in Alfa Slab One →