Free engraving pattern SVG

Oak leaf and acorn engraving pattern SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oak leaf and acorn engraving pattern, as a solid black shape
Oak leaf and acorn engraving pattern. The preview is the SVG file itself.

A curved twig with five lobed oak leaves, each with its midrib cut, and two acorns in their cups near its foot. A hunting and woodland motif for flasks, knife scales and cabin signs.

What is in the file

Size100 × 92 mm (3.94 × 3.63 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length896 mm at this size
Narrowest part2.1 mm at this size
Nodes291 curve and line segments

Measured from the file. PNG: 2,000 × 1,848 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.53 mm228 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.84 in (51 × 47 mm)1.1 mm455 mm25Vinyl, card and thin sheet
3 × 2.76 in (76 × 70 mm)1.6 mm683 mm12Vinyl, card and thin sheet
4 × 3.68 in (102 × 94 mm)2.1 mm910 mm6Vinyl, card and thin sheet
6 × 5.53 in (152 × 140 mm)3.2 mm1,366 mm2Any material, including 3 mm wood and acrylic
8 × 7.37 in (203 × 187 mm)4.3 mm1,821 mm1Any material, including 3 mm wood and acrylic
12 × 11.05 in (305 × 281 mm)6.4 mm2,731 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More engraving pattern SVG files

← Floral spray engraving pattern All 14 engraving patterns Wheat ear engraving pattern for glass →