Free egg SVG

Egg and bacon smiley face SVG

Egg and bacon smiley face. The preview is the SVG file itself.

Breakfast arranged as a face on a plate: two fried eggs for the eyes and a rasher of bacon for the smile, all joined to the rim of the plate so it cuts as one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	1,510 mm at this size
Narrowest part	3.3 mm at this size
Nodes	180 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.84 mm	384 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.7 mm	767 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	2.5 mm	1,151 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	3.4 mm	1,534 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	5 mm	2,301 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	6.7 mm	3,068 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	10 mm	4,602 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More egg SVG files

← Fried egg and bacon All 18 eggs Fried egg on toast →