Free earring card SVG

Heart earring card SVG

Heart earring card, as a solid black shape
Heart earring card. The preview is the SVG file itself.

A heart-shaped card with the stud holes side by side in its broad upper half and a hang hole at the top of each lobe, so it can hang level from two pegs or a ribbon. For Valentine and wedding sets.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length363 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes36 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)Over 1.5 mm92 mm110Vinyl, card and thin sheet
2 × 1.81 in (51 × 46 mm)Over 3 mm184 mm30Any material, including 3 mm wood and acrylic
3 × 2.71 in (76 × 69 mm)Over 4.6 mm277 mm12Any material, including 3 mm wood and acrylic
4 × 3.62 in (102 × 92 mm)Over 6.1 mm369 mm6Any material, including 3 mm wood and acrylic
6 × 5.42 in (152 × 138 mm)Over 9.1 mm553 mm2Any material, including 3 mm wood and acrylic
8 × 7.23 in (203 × 184 mm)Over 12 mm738 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)Over 18 mm1,106 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More earring card SVG files

← Earring card with a scalloped edge All 15 earring cards Cloud earring card →