Free dress SVG

Polka dot swing dress with a belt SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Polka dot swing dress with a belt, as a solid black shape
Polka dot swing dress with a belt. The preview is the SVG file itself.

A fifties swing dress: a V neck with a collar, short sleeves, a belt with a buckle and a full skirt scattered with round spots. Exactly mirrored. For vintage fairs and sewing room signs.

What is in the file

Size94 × 100 mm (3.71 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut36: 1 outer edge and 35 cut-outs
Cut length996 mm at this size
Narrowest part1.2 mm at this size
Nodes195 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,890 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.3 mm253 mm100Too fine for most machines
1.89 × 2 in (48 × 51 mm)0.61 mm506 mm25Fine detail: vinyl and paper only, weed with care
2.83 × 3 in (72 × 76 mm)0.91 mm759 mm12Fine detail: vinyl and paper only, weed with care
3.77 × 4 in (96 × 102 mm)1.2 mm1,012 mm6Vinyl, card and thin sheet
5.66 × 6 in (144 × 152 mm)1.8 mm1,518 mm2Vinyl, card and thin sheet
7.54 × 8 in (192 × 203 mm)2.4 mm2,024 mm1Vinyl, card and thin sheet
11.32 × 12 in (287 × 305 mm)3.7 mm3,036 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dress SVG files

← Butterfly dress All 15 dresses Dress form on a stand →