Free Dream SVG

Dream in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dream in Amatic SC, as a solid black shape
Dream in Amatic SC. The preview is the SVG file itself.

“Dream” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 49 mm (3.94 × 1.93 in), scales to any size
Pieces5 separate pieces
Outlines to cut8: 5 outer edges and 3 cut-outs
Cut length958 mm at this size
Narrowest part2.7 mm at this size
Nodes232 curve and line segments

Measured from the file. PNG: 2,000 × 1,021 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.69 mm243 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.98 in (51 × 25 mm)1.4 mm487 mm50Vinyl, card and thin sheet
3 × 1.47 in (76 × 37 mm)2.1 mm730 mm21Vinyl, card and thin sheet
4 × 1.96 in (102 × 50 mm)2.7 mm973 mm10Vinyl, card and thin sheet
6 × 2.95 in (152 × 75 mm)4.1 mm1,460 mm3Any material, including 3 mm wood and acrylic
8 × 3.93 in (203 × 100 mm)5.5 mm1,947 mm2Any material, including 3 mm wood and acrylic
12 × 5.89 in (305 × 150 mm)8.2 mm2,920 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dream SVG files

← Dream in Alfa Slab One All 13 Dream designs Dream in block capitals →