Free Dream SVG

Dream with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dream with a swash underline, as a solid black shape
Dream with a swash underline. The preview is the SVG file itself.

“Dream” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 37 mm (3.94 × 1.46 in), scales to any size
Pieces2 separate pieces
Outlines to cut4: 2 outer edges and 2 cut-outs
Cut length695 mm at this size
Narrowest part2.1 mm at this size
Nodes198 curve and line segments

Measured from the file. PNG: 2,000 × 792 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.53 mm177 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.74 in (51 × 19 mm)1.1 mm353 mm60Vinyl, card and thin sheet
3 × 1.12 in (76 × 28 mm)1.6 mm530 mm27Vinyl, card and thin sheet
4 × 1.49 in (102 × 38 mm)2.1 mm706 mm14Vinyl, card and thin sheet
6 × 2.23 in (152 × 57 mm)3.2 mm1,059 mm5Any material, including 3 mm wood and acrylic
8 × 2.98 in (203 × 76 mm)4.3 mm1,412 mm3Any material, including 3 mm wood and acrylic
12 × 4.46 in (305 × 113 mm)6.4 mm2,118 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dream SVG files

← Dream in block capitals All 13 Dream designs Dream with stars →