DR Congo cut from a square tile SVG
A square tile with rounded corners, 100 mm each way, with the Democratic Republic of the Congo cut out of it. Cut the tile from wood or acrylic for a trivet or a wall plaque, or use it as a stencil to paint the Democratic Republic of the Congo on a bag or a board.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 693 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 383 curve and line segments |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | Over 1.5 mm | 176 mm | 100 | Vinyl, card and thin sheet |
| 2 × 2 in (51 × 51 mm) | Over 3 mm | 352 mm | 25 | Any material, including 3 mm wood and acrylic |
| 3 × 3 in (76 × 76 mm) | Over 4.6 mm | 528 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 4 in (102 × 102 mm) | Over 6.1 mm | 704 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | Over 9.1 mm | 1,056 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | Over 12 mm | 1,408 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | Over 18 mm | 2,112 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More DR Congo SVG files
-
DR Congo cut from a heart Solid · one piece -
DR Congo with its name beneath Solid · 8 pieces -
Split DR Congo for a name Solid · 2 pieces -
DR Congo in stripes Solid · 14 pieces -
Layered DR Congo on an octagon Layered · 2 pieces -
DR Congo map silhouette Solid · one piece -
DR Congo outline Outline · one piece -
DR Congo with a heart cut out Solid · one piece
← DR Congo cut from a disc All 10 DR Congo designs DR Congo cut from a heart →