Free DR Congo SVG

DR Congo with its name beneath SVG

DR Congo with its name beneath, as a solid black shape — DR Congo with its name beneath. The preview is the SVG file itself.

The solid shape of the Democratic Republic of the Congo with “DR CONGO” in narrow capitals under it. The letters of “DR Congo” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	12: 8 outer edges and 4 cut-outs
Cut length	679 mm at this size
Narrowest part	1.7 mm at this size
Nodes	535 curve and line segments

Measured from the file. PNG: 1,681 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.83 × 1 in (21 × 25 mm)	0.43 mm	172 mm	110	Too fine for most machines
1.67 × 2 in (42 × 51 mm)	0.86 mm	345 mm	30	Fine detail: vinyl and paper only, weed with care
2.5 × 3 in (64 × 76 mm)	1.3 mm	517 mm	12	Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)	1.7 mm	690 mm	6	Vinyl, card and thin sheet
5 × 6 in (127 × 152 mm)	2.6 mm	1,035 mm	2	Vinyl, card and thin sheet
6.67 × 8 in (169 × 203 mm)	3.5 mm	1,380 mm	1	Any material, including 3 mm wood and acrylic
10.01 × 12 in (254 × 305 mm)	5.2 mm	2,070 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More DR Congo SVG files

← DR Congo cut from a heart All 10 DR Congo designs Split DR Congo for a name →