Free Don’t Get Your Tinsel in a Tangle SVG

Tinsel in a Tangle in Alfa Slab One SVG

Tinsel in a Tangle in Alfa Slab One, as a solid black shape
Tinsel in a Tangle in Alfa Slab One. The preview is the SVG file itself.

“Don’t Get Your Tinsel in a Tangle” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 57 mm (3.94 × 2.23 in), scales to any size
Pieces28 separate pieces
Outlines to cut37: 28 outer edges and 9 cut-outs
Cut length1,314 mm at this size
Narrowest part1 mm at this size
Nodes820 curve and line segments

Measured from the file. PNG: 2,000 × 1,167 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.25 mm334 mm150Too fine for most machines
2 × 1.13 in (51 × 29 mm)0.51 mm668 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.7 in (76 × 43 mm)0.76 mm1,001 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.27 in (102 × 58 mm)1 mm1,335 mm8Vinyl, card and thin sheet
6 × 3.4 in (152 × 86 mm)1.5 mm2,003 mm3Vinyl, card and thin sheet
8 × 4.54 in (203 × 115 mm)2 mm2,670 mm2Vinyl, card and thin sheet
12 × 6.8 in (305 × 173 mm)3 mm4,005 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Don’t Get Your Tinsel in a Tangle SVG files

← Tinsel in a Tangle in Lilita One All 12 Don’t Get Your Tinsel in a Tangle designs Tinsel in a Tangle in Amatic SC →