Free Don’t Get Your Tinsel in a Tangle SVG

Tinsel in a Tangle in Amatic SC SVG

Tinsel in a Tangle in Amatic SC, as a solid black shape
Tinsel in a Tangle in Amatic SC. The preview is the SVG file itself.

“Don’t Get Your Tinsel in a Tangle” set in Amatic SC, narrow hand-drawn capitals, on 3 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 98 mm (3.94 × 3.85 in), scales to any size
Pieces27 separate pieces
Outlines to cut33: 27 outer edges and 6 cut-outs
Cut length2,166 mm at this size
Narrowest part1.4 mm at this size
Nodes864 curve and line segments

Measured from the file. PNG: 2,000 × 1,960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.36 mm550 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.71 mm1,100 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.94 in (76 × 75 mm)1.1 mm1,650 mm9Vinyl, card and thin sheet
4 × 3.92 in (102 × 99 mm)1.4 mm2,201 mm4Vinyl, card and thin sheet
6 × 5.87 in (152 × 149 mm)2.1 mm3,301 mm2Vinyl, card and thin sheet
8 × 7.83 in (203 × 199 mm)2.8 mm4,401 mm1Vinyl, card and thin sheet
12 × 11.75 in (305 × 298 mm)4.3 mm6,602 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Don’t Get Your Tinsel in a Tangle SVG files

← Tinsel in a Tangle in Alfa Slab One All 12 Don’t Get Your Tinsel in a Tangle designs Tinsel in a Tangle in block capitals →