Free dog tag SVG

Pair of dog tags on a ball chain SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pair of dog tags on a ball chain, as a solid black shape
Pair of dog tags on a ball chain. The preview is the SVG file itself.

Two tags fanned apart on one loop of ball chain, the front one lying over the back one with a thin gap between them. Both are blank inside a rolled rim, so a name and a date can go on each.

What is in the file

Size52 × 100 mm (2.05 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length873 mm at this size
Narrowest part1.3 mm at this size
Nodes196 curve and line segments

Measured from the file. PNG: 1,077 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.52 × 1 in (13 × 25 mm)0.33 mm222 mm160Too fine for most machines
1.04 × 2 in (26 × 51 mm)0.66 mm443 mm45Fine detail: vinyl and paper only, weed with care
1.56 × 3 in (40 × 76 mm)0.99 mm665 mm18Fine detail: vinyl and paper only, weed with care
2.08 × 4 in (53 × 102 mm)1.3 mm887 mm10Vinyl, card and thin sheet
3.12 × 6 in (79 × 152 mm)2 mm1,330 mm3Vinyl, card and thin sheet
4.16 × 8 in (106 × 203 mm)2.6 mm1,774 mm2Vinyl, card and thin sheet
6.24 × 12 in (158 × 305 mm)4 mm2,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog tag SVG files

← Dog tags in three colours All 14 dog tags Single blank dog tag →