Free dog groomer SVG

Dog groomer rosette with a dog SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dog groomer rosette with a dog, as a solid black shape
Dog groomer rosette with a dog. The preview is the SVG file itself.

A show rosette with a pleated edge, a ring of dashes and two ribbon tails, with the little woolly dog cut out of the middle. For a competition, a grooming school pass or a thank you card.

What is in the file

Size70 × 100 mm (2.75 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length857 mm at this size
Narrowest part2.6 mm at this size
Nodes323 curve and line segments

Measured from the file. PNG: 1,419 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.66 mm218 mm130Fine detail: vinyl and paper only, weed with care
1.4 × 2 in (35 × 51 mm)1.3 mm435 mm35Vinyl, card and thin sheet
2.09 × 3 in (53 × 76 mm)2 mm653 mm15Vinyl, card and thin sheet
2.79 × 4 in (71 × 102 mm)2.6 mm871 mm8Vinyl, card and thin sheet
4.19 × 6 in (106 × 152 mm)4 mm1,306 mm2Any material, including 3 mm wood and acrylic
5.58 × 8 in (142 × 203 mm)5.3 mm1,741 mm2Any material, including 3 mm wood and acrylic
8.38 × 12 in (213 × 305 mm)7.9 mm2,612 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dog groomer SVG files

← Dog groomer fresh trim with a bow All 16 dog groomers Dog groomer apron with a pocket of tools →