Free Dirty Thirty SVG

Dirty Thirty in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dirty Thirty in Alfa Slab One, as a solid black shape
Dirty Thirty in Alfa Slab One. The preview is the SVG file itself.

“Dirty Thirty” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 65 mm (3.94 × 2.54 in), scales to any size
Pieces13 separate pieces
Outlines to cut14: 13 outer edges and 1 cut-out
Cut length975 mm at this size
Narrowest part3.1 mm at this size
Nodes202 curve and line segments

Measured from the file. PNG: 2,000 × 1,319 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.79 mm248 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.29 in (51 × 33 mm)1.6 mm495 mm40Vinyl, card and thin sheet
3 × 1.94 in (76 × 49 mm)2.4 mm743 mm15Vinyl, card and thin sheet
4 × 2.58 in (102 × 66 mm)3.1 mm991 mm8Any material, including 3 mm wood and acrylic
6 × 3.88 in (152 × 98 mm)4.7 mm1,486 mm2Any material, including 3 mm wood and acrylic
8 × 5.17 in (203 × 131 mm)6.3 mm1,981 mm2Any material, including 3 mm wood and acrylic
12 × 7.75 in (305 × 197 mm)9.4 mm2,972 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dirty Thirty SVG files

← Dirty Thirty in Lilita One All 13 Dirty Thirty designs Dirty Thirty in Amatic SC →