Free Dirty Thirty SVG

Dirty Thirty outline lettering SVG

Dirty Thirty outline lettering, drawn as a line — Dirty Thirty outline lettering. The preview is the SVG file itself.

“Dirty Thirty” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.87 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	28: 14 outer edges and 14 cut-outs
Cut length	1,601 mm at this size
Narrowest part	1.4 mm at this size
Nodes	364 curve and line segments

Measured from the file. PNG: 2,000 × 1,479 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 19 mm)	0.36 mm	407 mm	130	Too fine for most machines
2 × 1.46 in (51 × 37 mm)	0.71 mm	813 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.19 in (76 × 56 mm)	1.1 mm	1,220 mm	15	Vinyl, card and thin sheet
4 × 2.92 in (102 × 74 mm)	1.4 mm	1,627 mm	6	Vinyl, card and thin sheet
6 × 4.37 in (152 × 111 mm)	2.1 mm	2,440 mm	2	Vinyl, card and thin sheet
8 × 5.83 in (203 × 148 mm)	2.8 mm	3,253 mm	2	Vinyl, card and thin sheet
12 × 8.75 in (305 × 222 mm)	4.3 mm	4,880 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dirty Thirty SVG files

← Dirty Thirty with stars All 12 Dirty Thirty designs Dirty Thirty stencil plate →