Free desert SVG

Desert outline with a mesa and a saguaro SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Desert outline with a mesa and a saguaro, drawn as a line
Desert outline with a mesa and a saguaro. The preview is the SVG file itself.

The desert as a joined line drawing: a saguaro in front of a mesa, a butte, and the sun as an arc behind them, on a ground line. For colouring pages, foil and pen plotters.

What is in the file

Size100 × 32 mm (3.94 × 1.26 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length806 mm at this size
Narrowest part2 mm at this size
Nodes177 curve and line segments

Measured from the file. PNG: 2,000 × 694 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.51 mm205 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.64 in (51 × 16 mm)1 mm409 mm70Vinyl, card and thin sheet
3 × 0.96 in (76 × 24 mm)1.5 mm614 mm30Vinyl, card and thin sheet
4 × 1.28 in (102 × 33 mm)2 mm819 mm16Vinyl, card and thin sheet
6 × 1.93 in (152 × 49 mm)3 mm1,228 mm5Any material, including 3 mm wood and acrylic
8 × 2.57 in (203 × 65 mm)4.1 mm1,638 mm4Any material, including 3 mm wood and acrylic
12 × 3.85 in (305 × 98 mm)6.1 mm2,457 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More desert SVG files

← Desert sun frame for a monogram All 14 deserts Layered desert sunset in six colours →