Daisy with stem and leaves SVG
The classic daisy on a slender curved stem, with two spoon-shaped leaves low down where a daisy carries them.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 53 × 100 mm (2.09 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 17: 1 outer edge and 16 cut-outs |
| Cut length | 892 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 210 curve and line segments |
Measured from the file. PNG: 1,096 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.53 × 1 in (13 × 25 mm) | 0.43 mm | 227 mm | 160 | Too fine for most machines |
| 1.06 × 2 in (27 × 51 mm) | 0.86 mm | 453 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 1.59 × 3 in (40 × 76 mm) | 1.3 mm | 680 mm | 18 | Vinyl, card and thin sheet |
| 2.12 × 4 in (54 × 102 mm) | 1.7 mm | 906 mm | 10 | Vinyl, card and thin sheet |
| 3.18 × 6 in (81 × 152 mm) | 2.6 mm | 1,359 mm | 3 | Vinyl, card and thin sheet |
| 4.24 × 8 in (108 × 203 mm) | 3.5 mm | 1,813 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.36 × 12 in (162 × 305 mm) | 5.2 mm | 2,719 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Two daisies in silhouette 
Half daisy 
Daisy with falling petals 
Daisy chain 
Daisy chain heart 
Daisy wreath 
Daisy border 
Giant paper daisy template 