Free dachshund SVG

Dachshund mum and pup SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dachshund mum and pup, as a solid black shape
Dachshund mum and pup. The preview is the SVG file itself.

A dachshund standing with her pup in front of her, under her nose, both looking the same way. The tip of the pup’s tail rests on her chest, so the pair cut as one piece.

What is in the file

Size100 × 40 mm (3.94 × 1.57 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length521 mm at this size
Narrowest part1.2 mm at this size
Nodes278 curve and line segments
Also found asDachshund mom SVG

Measured from the file. PNG: 2,000 × 842 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)0.3 mm132 mm200Too fine for most machines
2 × 0.8 in (51 × 20 mm)0.61 mm265 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.19 in (76 × 30 mm)0.91 mm397 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.59 in (102 × 40 mm)1.2 mm529 mm12Vinyl, card and thin sheet
6 × 2.39 in (152 × 61 mm)1.8 mm794 mm4Vinyl, card and thin sheet
8 × 3.18 in (203 × 81 mm)2.4 mm1,059 mm3Vinyl, card and thin sheet
12 × 4.78 in (305 × 121 mm)3.7 mm1,588 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dachshund SVG files

← Dachshund in a paw print All 13 dachshunds Layered dachshund through the snow →