Cow print heart SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A heart with cow patches cut out of it and a plain rim all round, so it stays one piece. Cut it in black on white or pink for cards, tumblers and shirts.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.56 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 915 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 226 curve and line segments |
Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.25 mm | 232 mm | 110 | Too fine for most machines |
| 2 × 1.81 in (51 × 46 mm) | 0.51 mm | 465 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.71 in (76 × 69 mm) | 0.76 mm | 697 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.62 in (102 × 92 mm) | 1 mm | 930 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.42 in (152 × 138 mm) | 1.5 mm | 1,394 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.23 in (203 × 184 mm) | 2 mm | 1,859 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.85 in (305 × 276 mm) | 3 mm | 2,789 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.