Free cow SVG

Cute cow face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cute cow face, as a solid black shape
Cute cow face. The preview is the SVG file itself.

A calf face with no horns, wide eyes, a patch cut out over one side of the brow and a tuft of hair. Softer than the grown cow, for nursery prints and party makes.

What is in the file

Size100 × 73 mm (3.94 × 2.86 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length675 mm at this size
Narrowest part1 mm at this size
Nodes182 curve and line segments

Measured from the file. PNG: 2,000 × 1,473 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 18 mm)0.25 mm171 mm130Too fine for most machines
2 × 1.45 in (51 × 37 mm)0.51 mm343 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.18 in (76 × 55 mm)0.76 mm514 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.9 in (102 × 74 mm)1 mm686 mm6Vinyl, card and thin sheet
6 × 4.36 in (152 × 111 mm)1.5 mm1,029 mm2Vinyl, card and thin sheet
8 × 5.81 in (203 × 148 mm)2 mm1,372 mm2Vinyl, card and thin sheet
12 × 8.71 in (305 × 221 mm)3 mm2,057 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cow SVG files

← Bull, a male cow, with its head down All 18 cows Highland cow face →