Free cow print SVG

Cow print stencil panel SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cow print stencil panel, as a solid black shape
Cow print stencil panel. The preview is the SVG file itself.

A rounded square with the patches cut out as holes and a plain border left round it. One piece: use it as a stencil, or lay it over white for black-on-white in reverse.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length1,268 mm at this size
Narrowest patch3.4 mm at this size
Thinnest wall between cut-outs1.6 mm at this size
Nodes451 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest patchCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.86 mm322 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.7 mm644 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.6 mm966 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3.5 mm1,288 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)5.2 mm1,932 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)6.9 mm2,577 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)10 mm3,865 mm1Any material, including 3 mm wood and acrylic

The narrowest patch is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More cow print SVG files

← Cow print star All 14 cow prints Cow print border strip →