Free cotton SVG

Layered cotton stem in three colours SVG

Layered cotton stem in three colours, in layered colours
Layered cotton stem in three colours. The preview is the SVG file itself.

Three layers to stack: the whole stem in dark brown as a backing, cream fluff for the three bolls, and soft grey creases on top. Cut the cream from felt or textured card for a raised look.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size80 × 100 mm (3.15 × 3.94 in), scales to any size
Pieces19 separate pieces
Outlines to cut19 outlines
Cut length1,039 mm at this size
Narrowest part2.8 mm at this size
Nodes306 curve and line segments
Layers3: stem, cotton and creases

Measured from the file. PNG: 1,615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.71 mm264 mm120Fine detail: vinyl and paper only, weed with care
1.6 × 2 in (41 × 51 mm)1.4 mm528 mm30Vinyl, card and thin sheet
2.4 × 3 in (61 × 76 mm)2.1 mm792 mm12Vinyl, card and thin sheet
3.2 × 4 in (81 × 102 mm)2.8 mm1,056 mm6Vinyl, card and thin sheet
4.8 × 6 in (122 × 152 mm)4.3 mm1,583 mm2Any material, including 3 mm wood and acrylic
6.4 × 8 in (163 × 203 mm)5.7 mm2,111 mm1Any material, including 3 mm wood and acrylic
9.6 × 12 in (244 × 305 mm)8.5 mm3,167 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cotton SVG files

← Cotton swag border All 13 cotton designs Cotton boll on a short stem →