Free cookie SVG

Plate of cookies SVG

Plate of cookies, as a solid black shape
Plate of cookies. The preview is the SVG file itself.

A plate seen from above with three chocolate chip cookies on it, each just overlapping the next. The cookies reach the rim of the plate, so the whole design cuts as one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut23: 1 outer edge and 22 cut-outs
Cut length1,183 mm at this size
Narrowest part3 mm at this size
Nodes225 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.76 mm300 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.5 mm601 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.3 mm901 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3 mm1,202 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)4.6 mm1,803 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)6.1 mm2,404 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)9.1 mm3,606 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cookie SVG files

← Stack of cookies All 15 cookies Cookies and milk →