Free coal miner SVG

Coal miner drift mine entrance SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Coal miner drift mine entrance, as a solid black shape
Coal miner drift mine entrance. The preview is the SVG file itself.

The mouth of a drift mine: two leaning posts and a cap timber set in a hillside, with a track of four sleepers running out of the dark. A scene for a sign or a memorial plaque.

What is in the file

Size100 × 87 mm (3.94 × 3.43 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length869 mm at this size
Narrowest part2 mm at this size
Nodes99 curve and line segments

Measured from the file. PNG: 2,000 × 1,750 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.87 in (25 × 22 mm)0.51 mm221 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.74 in (51 × 44 mm)1 mm441 mm30Vinyl, card and thin sheet
3 × 2.61 in (76 × 66 mm)1.5 mm662 mm12Vinyl, card and thin sheet
4 × 3.48 in (102 × 88 mm)2 mm883 mm6Vinyl, card and thin sheet
6 × 5.22 in (152 × 133 mm)3 mm1,324 mm2Any material, including 3 mm wood and acrylic
8 × 6.96 in (203 × 177 mm)4.1 mm1,766 mm1Any material, including 3 mm wood and acrylic
12 × 10.44 in (305 × 265 mm)6.1 mm2,649 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More coal miner SVG files

← Coal miner safety lamp All 13 coal miners Coal miner dinner pail →