Three doodle clouds SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Three small clouds drawn in line, each with a curl inside one puff as if sketched in a notebook margin. Three separate pieces.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.89 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 6: 3 outer edges and 3 cut-outs |
| Cut length | 938 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 232 curve and line segments |
Measured from the file. PNG: 2,000 × 1,487 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 19 mm) | 0.3 mm | 238 mm | 130 | Too fine for most machines |
| 2 × 1.47 in (51 × 37 mm) | 0.61 mm | 477 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.2 in (76 × 56 mm) | 0.91 mm | 715 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.93 in (102 × 74 mm) | 1.2 mm | 953 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.4 in (152 × 112 mm) | 1.8 mm | 1,430 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.86 in (203 × 149 mm) | 2.4 mm | 1,906 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.8 in (305 × 223 mm) | 3.7 mm | 2,859 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.