Free clock SVG

Clock with gears showing SVG

Clock with gears showing. The preview is the SVG file itself.

A skeleton clock with its works on show: a toothed centre wheel carrying the hands, three small gears meshed round it and a rim with hour marks. The gears touch the rim, so it is all one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	30: 1 outer edge and 29 cut-outs
Cut length	1,638 mm at this size
Narrowest part	1.8 mm at this size
Nodes	407 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.46 mm	416 mm	100	Too fine for most machines
2 × 2 in (51 × 51 mm)	0.91 mm	832 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)	1.4 mm	1,248 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	1.8 mm	1,664 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	2.7 mm	2,496 mm	1	Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)	3.7 mm	3,328 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	5.5 mm	4,993 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More clock SVG files

← Cuckoo clock All 14 clocks Mandala clock face →