Easter chicken chick hatching SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A chick just out of its egg, wings up, sitting in the bottom half of a cracked shell with a zigzag edge. A slit marks the edge of the shell across its tummy.
What is in the file
| Size | 71 × 100 mm (2.78 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 531 mm at this size |
| Narrowest part | 4.4 mm at this size |
| Nodes | 132 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,433 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.71 × 1 in (18 × 25 mm) | 1.1 mm | 135 mm | 130 | Vinyl, card and thin sheet |
| 1.41 × 2 in (36 × 51 mm) | 2.2 mm | 270 mm | 35 | Vinyl, card and thin sheet |
| 2.11 × 3 in (54 × 76 mm) | 3.4 mm | 405 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.82 × 4 in (72 × 102 mm) | 4.5 mm | 539 mm | 8 | Any material, including 3 mm wood and acrylic |
| 4.23 × 6 in (107 × 152 mm) | 6.7 mm | 809 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.64 × 8 in (143 × 203 mm) | 8.9 mm | 1,079 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.46 × 12 in (215 × 305 mm) | 13 mm | 1,618 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.