Free chef SVG

Chef hat outline SVG

Chef hat outline, drawn as a line
Chef hat outline. The preview is the SVG file itself.

The puffed hat as a line drawing, with the band line running edge to edge so the drawing stays in one piece. For colouring sheets, recipe cards, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 85 mm (3.94 × 3.34 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length842 mm at this size
Narrowest part2.4 mm at this size
Nodes81 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,708 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.61 mm214 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.7 in (51 × 43 mm)1.2 mm428 mm30Vinyl, card and thin sheet
3 × 2.54 in (76 × 65 mm)1.8 mm642 mm12Vinyl, card and thin sheet
4 × 3.39 in (102 × 86 mm)2.4 mm855 mm6Vinyl, card and thin sheet
6 × 5.09 in (152 × 129 mm)3.7 mm1,283 mm2Any material, including 3 mm wood and acrylic
8 × 6.78 in (203 × 172 mm)4.9 mm1,711 mm1Any material, including 3 mm wood and acrylic
12 × 10.18 in (305 × 258 mm)7.3 mm2,566 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More chef SVG files

← Tall pleated chef hat All 17 chefs Chef hat and moustache →