Free chef SVG

Chef apron SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Chef apron, as a solid black shape
Chef apron. The preview is the SVG file itself.

A bib apron laid flat: a neck strap, a bib that curves out to the waist, a tie at each side and a wide pocket with a line down its middle. Blank above the pocket for a name.

What is in the file

Size100 × 98 mm (3.94 × 3.86 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length717 mm at this size
Narrowest part1 mm at this size
Nodes78 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,962 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.25 mm182 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.51 mm364 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.94 in (76 × 75 mm)0.76 mm546 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.92 in (102 × 100 mm)1 mm728 mm4Vinyl, card and thin sheet
6 × 5.88 in (152 × 149 mm)1.5 mm1,093 mm2Vinyl, card and thin sheet
8 × 7.84 in (203 × 199 mm)2 mm1,457 mm1Vinyl, card and thin sheet
12 × 11.76 in (305 × 299 mm)3 mm2,185 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More chef SVG files

← Chef whisk and rolling pin crossed All 17 chefs Chef knife →